Yaskawa SmartTrac DM6420 Multi I/O Card - Manual (Page 8)

Smart Trac DM6420 Multi I/O Card
4
••
Smart Trac DM6420 Multi I/O Card Technical Manual
Quick Start
1. Check DIP switch settings on the card against the default settings (see
“Default Settings"). You should use default settings except in only
unusual situations. Your Smart Trac Field Engineer can help you if you
need assistance.
2. Power OFF your Smart Trac AC1.
3. Install the card in your Smart Trac AC1 in a PC/104 option card
position (on top of the Smart Trac Ethernet Card or another PC/104
option card).
4. Power up your Smart Trac AC1.
5. Test your card installation.