Invotel SX8800 - Manual (Page 6)

Special Cases:
Some phones like GE 2-9487GE2-A , GE 2-9488GE2-A and all RCA phones beep every few
seconds when the calls are placed on Hold and may not work properly in C2 or B2 settings ( the
beep may turn off the Hold Music in some cases)
in that case use the B1 setting or use the A settings and increase the volume a bit so that the beeps
are less noticeable to the callers.
If audio activates suddenly in A1 or A2 switch settings , your lines may be “too powerful” Try A3
setting.
Digital Player Advanced Features:
USB Mp3 Player /repeater
Single or multi tracks up to 99 tracks
Wall mount capability area
Package Content:
SX8800 unit
Power adapter 110/240v AC to 12v DC 200-500 ma
2 RJ-14 phone cords
User’s Manual
SD card/USB Flash drive 32 MB or Higher capacity
Adjusting Output VOLUME
If the On Hold audio volume is too low turn the VOLUME control clockwise; If it is too loud turn the VOLUME
control counter clockwise to desired level.
Connecting to a Computer:
Remove the SD card/USB Flash drive and insert it into a SD card slot or USB Flash drive port
normally found on most PC or laptops (use a USB adapter in case the PC only has a USB port and
you have a SD card)
After you make the connection it will be detected as “Removable Disk” , when you open “My
Computer” or “Windows Explorer”
Transferring files into SD card/USB Flash drive:
Select the file you want to transfer to the SD card/USB Flash drive and drag-and-drop it into the
“Removable Disk” that represents this device (right click on the file, copy, move the mouse to the
“Removable Disk” , right click there and paste)
The player will play all the .mp3 files one by one before it auto repeats from the 1
st
file, You may
silence the .mp3 files you do not want to play by renaming them to “file.ip3” or just keep one .mp3
file in the SD card/USB Flash drive, i.e. move or delete the extra files you do not want to play from
the SD card/USB Flash drive.
When the file is being transferred to SD card/USB Flash drive allow several seconds for it to finish
transferring before removing the SD card/USB Flash drive.
Please refer to file “README.doc” on the USB Flash drive or SD card for more information on file
formats, multiple track playbacks and information on how to make your own custom recording files.
If you have a new SD card / USB flash drive with new production in it, remove the old SD or USB
flash drive, insert the new one and make sure it is in, playback automatically starts.
P6