Epson SR-600 - Manual (Page 116)

6-10 Peripherals/Option Installation Rev.A
Confidential
Calibration
It modifies the cordinate position by clicking on the modification standard position. During the
modification, it outputs the tap sounds regardles of click sound On/Off setting. Also, cursor is
not displayed. It prepares that tap operation can be normally performed during IME mode.
6-5 Calibration Screen
[Modification point "+"]
The [+] character is displayed sequentially in nine places on the coordinate position. By clicking
on the [+] point, the coordinate is recognized. If the points other than [+] point, it is ignored.
When all the point 1 to 9 (click 1 to 9 is a must), it exits the coordinate modification screem and
display the calibration screen. The point is displayed by one point in order by which the pointe
is clicked. Screen is displayed in full screen.
[Cancel buton]
It cancels the setting. Exits the coordinate modification and display the calibration screen when
it’s clicked.