Epson SR-600 - Manual (Page 19)

Rev.A General Features 1-9
Developer's Guide SR-600 Confidential
Switches
❏ Front power switch
The front power switch is a push type switch on the bottom of the left side corner under the
switch cover. It turns on and off the system. The front power switch is placed under the front
cover to prevent the operation mistake from being turning off accidentally. It changes the
front power status of SR-600 to power on, standby, or off. The functionality of the front
power switch is determined by BIOS Setup utiliy.
❏ Main power switch
The main power switch on the back of the SR-600 isolates the AC line voltage from the
power supply. Remove the rear cover to turn on and off the main power. During the normal
use, this switch is left on.
❏ Reset Switch
The reset switch under the switch cover by the right side of the front power switch resets the
hardware of the SR-600. If the system hangs for any reason and cannot recover, pressing this
switch restarts the system.
Figure 1-7 Switch locations
Reset Switch
Front Power
Switch
Main Power
Switch