Epson SR-600 - Manual (Page 61)

Rev.A BIOS Setup 3-17
Developer's Guide SR-600 Confidential
❏ To display a pull-down menu, use the left arrow or right arrow key to highlight the option;
then press Enter. You also can see the pull-down menu if you press the key for the first letter
of the option. (The initialize option does not have a pull-down menu.)
❏ To select an option from the pull-down menu, use the up arrow or down arrow key to
highlight the option; then press Enter. If the option has a dialog box, you see it when you
press Enter. You also can see the pull-down menu if you press the key for the first letter of
the option.
❏ Press Esc to close a pull-down menu or a dialog box.
❏ Press the Backspace key to correct typing.
Initialize
When you select “Initialize” from the menu bar, device diagnostics restarts the program. If
device diagnostics displays “no communication” for the TM status of TM/Drawer area or DM
status of DM area, fix the problem. Then select this option to reset the program.
Exit
When “Exit” is selected from the menu, the device diagnostics is closed and the SR-600 restarts.
Device Diagnostics Utility Screen
The device diagnostics utility screen is divided into the following five areas:
❏ TM/Drawer
❏ DM
❏ COM Ports
❏ LPT1
❏ Messages