Confidential – Epson SR-600 User Manual
Page 66
Advertising
3-22
BIOS Setup
Rev.A
Confidential
Setting a Password for the Drawer Kick Out Test
Follow the procedures below to set a password for the drawer kick out test.
1. Select “Drawer Password” from the pull down menu. You are asked to enter the
password.
3-2 Enter Password screen
2. Enter the password to be set and press Enter. The password should be 4 to 8
alphanumeric characters. Upper and lower case characters are distinguished. The
Password must be at least 4 characters.
3. Message “Re-enter” appears. Input the password again and press Enter. The password is
now set.
When the password is set, inputting the password is required when you try to execute the
Drawer kick out test.
Advertising