Lanner IPMI - Manual (Page 50)

Version 1.0
48
7.3 Preserve Configuration
This page is used to configure the system settings that will be preserved after the firmware update.
To configure the IPMI preservation settings, follow these steps:
1. SDR: Sensor Data Record. For more information, refer to IPMI specification.
2. SEL: Sensor Event Log. For more information, refer to 4.2 Event Log
3. IPMI: IPMI related configuration. For more information, refer to IPMI specification.
4. NTP: Network Time Protocol. For more information, refer to 5.5 NTP
5. Service: Services. For more information, refer to 5.7 Services.