Parkside PWS 125 B2 - Manual (Page 6)

6
GB
operating manual may therefore not be
asserted.
The vibration emission value has been mea-
sured according to a standardised testing
method and may be used for comparison
with another electric tool.
The indicated vibration emission value may
also be used for an introductory assessment
of the exposure.
Warning:
The vibration emission value whilst
actually using the electrical tool may
vary from the given values indepen-
dently of the type and way in which
the electric tool is used.
Safety measures for the protection
of the operator are to be determi-
ned that are based on an estimate
of the actual exposure under the
real operating conditions (for this,
all parts of the operating cycle are
to be taken into account, for examp-
le, times in which the electric tool is
turned off, and those during which
it is turned on but running without a
load).
Notes on safety
Caution! When using power tools,
observe the following basic safety
measures for the prevention of elec-
tric shocks and the risk of injury and
fire.
Please read all these instructions be-
fore using this electric tool and please
keep the safety instructions.
Symbols and icons
Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away
Warning! Electric shock hazard.
Always unplug the device before
working on it
Read the manual!
Wear ear protection
Wear eye protection
Wear breathing protection
Risk of cuts!
Wear cut-resistant gloves
Safety class II
Electrical machines do not belong
with domestic waste
Other symbols on the
cutting disc:
Do not use for side grinding
Do not use for wet grinding
Do not use defective discs
Suitable for metal
Wear safety shoes