Eiki LC-SXIU - Manual (Page 20)

CONNECTING TO THE VIDEO INPUT JACKS (I and 2) BNC TYPE x 3
Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other A’.~
equipment. Connect video output from AV equipment to these jacks using the BNC cables.
The video input can be connected 3 types of signals; “COMPOSITE VIDEO”, Y/C SEPARATE VIDEO’ and
COMPONENT VIDEO {Y, Cb (B-Y), Cr (R-Y)}.
Set VIDEO SOURCE of each video input (VIDEO IN-i or VIDEO IN-2) to input video matter. (Refer to VIDEO
SOURCE SELECT” operation on page 37).
CONNECTING S-VHS VIDEO INPUT JACKS (1 and 2)
The Video input includes an extra video input jack marked S-VIDEO to allow connection to an S-VHS format VCR that
has separate Y/C video signals. The S-VIDEO jack has priority over the VIDEO jack.
CONNECTING TO THE AUDIO INPUT JACKS (1 and 2)
Connect to the audio outputs of a VCR, video disc player, DVD olayer. video camera, satellite TV tuner or other A~
equipment. Use RCA type audio cable for connection.
• If the audio signal from the AV equipment is stereo, be sure to connect the right and left channels to the respective
righi and left audio input jacks.
• If the external audio signal is monaural, connect it to the left jack.
CONNECTING TO THE VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3)’
These jacks Will contain the video information of the selected program source being v~ewed on the screen (Video 1
or Video 2). If you have selected program source Video 2 the video signal connected to the Video 2 video input jack
will be available at the video monitor output jacks. If you select program source Computer 1 or Computer 2, the video
signal connected to the Video 1 video input jack will be available at the video monitor output jack. 5.
Use BNC cable for connection.
CONNECTING TO THE S-VHS VIDEO MONITOR OUTPUT JACK
The Video monitor output includes an extra video
input
jack marKed S-V!DF_O to allow connection to an S-VHS format
VCR that has separate Y/C video signals. The S-VIDEO jack has priority over the VIDEO jack.
CONNECTING TO THE AUDIO MONITOR OUTPUT JACKS
These jacks Will contain the audio information o~ The selected program source being viewed on the screen (Video 1
or Video 2). If you have selected program source Video 2 the audio signal connected to the Video 2 audio input jack
will be available at the audio monitor output jacks. If you select program source Computer i or Computer 2, the audio
signal connected to the Video 1 audio input jack will be available at the audio monitor output jacks.
Use RCA type audio cable for connection.
• If the audio input of the audio equipment is stereo, be sure to connect the right and left channels to the respective
right and left jacks.
• If the audio input of the audio equipment is monaural, connect it to the left jack.