Eiki LC-SXIU - Manual (Page 7)

POSITIONING:
• This projector is basically designed to project on a flat projection surface.
• This projector can be focused from 4.9 (1.5 m)
—
80.7 (24.6 m).
• Refer to the figure below as an example when positioning the projector to the screen.
THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG
THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE
HAZARD.
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by
twisting ADJUSTABLE FEET. Projection angle can
be adjusted up to 4 degrees by rotating Adjustable
Feet.
MOVE THE PROJECTED IMAGE POSITION
Adjust the projected image position (maximum 760mm
downward or upward on the 100’ screen) by using
lens shift function. (See page 33.)