Eiki LC-SXIU - Manual (Page 56)

Problem: Try these Solutions:
Picture is T/B inverted Check Reverse T/B feature.
(See “OTHER FUNCTION SETTING” section on pages 50
-
51).
Picture L/R Reversed. Check Reverse L/R feature.
(See “OTHER FUNCTION SETTING” section on pages 50
-
51).
Some displays are not seen
during the operation. Check Display feature.
(See “OTHER FUNCTION SETTING” section on pages 50
-
51).
No Sound • Check audio cable connection from audio input source.
• Adjust audio source.
• Press the VOLUME (+) button.
• Press the MUTE button.
Remote control unit doesn’t
work • Check the batteries.
• Make sure nothing is blocking between the remote control sensor and
remote control unit.
• Make sure you are not too far from the projector when using the remote
control unit. {Maximum operate range 16.4(5 m)}.
• Check the transmitted signal mode from the remote control unit.
(See “OTHER FUNCTION SETTING” section on pages 50
-
51).
Wireless Mouse function
does not work. • Check the cable connection between the projector and the computer.
• Check the mouse setting on your computer.
• Turn on the projector before you turn on the computer.