Casio DT-970 - Manual (Page 18)

E-16
USB Client Port This port is used to transmit data and fi les (download, upload) by
connecting the cradle to a PC using a USB cable (DT-380USB-A).
The dedicated driver must be installed in the PC before connecting
the cradle to the PC.
USB Host Port This port is used to connect a corresponding USB peripheral device.
Power Switch Turns the power on and off.
Selector Switch This switch is used to switch between a USB connection and a LAN
connection.
LAN Connection
Status LED This LED shows the status of the LAN connection.
Off: LAN cable not connected correctly.
Lit green: LAN cable connected correctly.
LAN
Communication
Status LED This LED shows the LAN operation status.
Off: No communication.
Blinking green: Communication in progress.
LAN Port This port is used for connecting the cradle to a PC or hub via a
LAN cable so that data and fi les can be transmitted (uploaded or
downloaded).
The special driver software must be installed in the DT-970.
AC Adaptor Jack Connect the AC adaptor here.
Terminal Detect
Switch This switch detects when the DT-970 is seated correctly on the cradle.
Power Contacts Power is supplied to the DT-970 via these contacts.
Data
Communication
Terminal Used for data communications.
Power Indicator
LED This LED indicates the power status and the mounting status of the
DT-970.
Off: Power off
Green: Power on, DT-970 mounted correctly
Red: Power on, DT-970 not mounted
Mount Hooks Use these hooks to lock the DT-970 into the cradle.