Casio DT-970 - Manual (Page 30)

E-28
Connecting the USB Cradle (HA-N60IO) Power Supply
You can use the optional USB cable (DT-380USB-A) to connect the USB Cradle to a
computer and use the computer as a power source.
Before attempting data communication with the DT-970, connect the USB Cradle and
the USB cable.
See pages 15 to 16 for the name and operation of each of the components.
1. Connect the USB cable (DT-380USB-A) to the USB client port on the back of the
USB Cradle, and then connect it to the PC.
PC
2. Align the contacts on the bottom of the DT-970 with the power contacts in the cradle
before inserting the DT-970 ( 1 ). Mount the DT-970 in the cradle so that the mount
hooks in the cradle are aligned with the mount holes in the DT-970 ( 2 ).
To remove the DT-970 from the cradle, tilt the DT-970 forward to disengage the
mount hooks from the mount holes and then lift the DT-970 out of the cradle.