Casio DT-970 - Manual (Page 34)

E-32
3. Connect the USB cable (DT-380USB-A) to the USB port on the back of the USB
Cradle and then connect it to the personal computer.
4. Line up the infrared interface on the bottom of the DT-970 and the infrared interface
on the USB Cradle to mount the DT-970.
5. Turn on the power switch.
The power indicator LED on the front of the USB Cradle lights green if the DT-970
is correctly mounted.
Important!
This does not supply power to the DT-970.
The DT-970 cannot be loaded directly into the cradle (HA-E60IO) itself. You
must fi t the optional attachment kit (HA-N64AT) fi rst.
Be careful not to pinch the hand strap when it is attached to the DT-970.
Draw the hand strap to the side of the cradle. •
•
•