Casio DT-970 - Manual (Page 28)

E-26
DT-970 Specifi cations
Model: DT-970M50E/M51E
CPU: 32bit CPU
Memory: 8MB RAM, 32MB Flash ROM (user area: approx. 28MB)
Display: 2.3-inch, 128 × 128-dot
Laser Scanner:
Readable symbologies: UPC-A/UPC-E/EAN8 (JAN8)/EAN13 (JAN13)/Codabar
(NW-7)/Code39/Interleaved2of5 (ITF)/MSI/Industrial2of5/
Code93/Code128 (GS1-128 (EAN128))/IATA/GS1
DataBarOmnidirectional (RSS-14)/GS1 DataBarLimited
(RSS Limited)/DataBar Expanded (RSS Expanded)/
GS1DataBarStacked (RSS-14 Stacked)/GS1DataBar Expanded
Stacked (RSS Expanded Stacked)/GS1 DataBar Truncated
(RSS-14 Truncated)/GS1 DataBar Stacked Omnidirectional
(RSS-14 Stacked)
Scanning distance: DT-970M51E: Within approximately 40-550 mm
DT-970M50E: Within approximately 45-550 mm
IR Port:
Interface:
IrDA Ver. 1.0
Synchronization: Asynchronous, frame synchronization
Transmission rate: 2,400 bps/9,600 bps/19,200 bps/38,400 bps/57,600 bps/
115,200 bps/
Bluetooth ® :
Protocol: Bluetooth ® Specifi cation Ver.2.1+EDR
Range: Approximately 5 m (depends on radio wave conditions
and environment)
Output: 4dBm max. (PowerClass2)
microSD Memory Card Slot:
Compatible with SDHC Memory Card
Power Requirements:
Main power supply: Alkaline AA batteries (LR6) 2
Or, eneloop AA batteries 2
Backup power supply: Lithium battery (CR2032) 1
Consumption Current: DC 3V/0.4A
Battery Life:
Main batteries: Approx. 175 hours (at room temperature using the alkaline AA
batteries supplied, with key standby, calculation and scanning
used in a 20:1:1 ratio)
Approx. 200 hours (at room temperature with 2 scans every 10
seconds)
Backup battery: 20 days (backup for the memory (RAM) and clock)
Operating Temperature: –10°C to 50°C (14°F to 122°F)
Operating Humidity: 10% to 80% RH (non-condensation)
Dust and Water Splash Proof:
IP67-compliant
Dimensions: Refer to “Dimensional Drawing” on the next page.
Weight: Approximately 215g (including alkaline AA batteries)
Vibrator Function: Available according to software setting.