Casio EA-200 Technical Reference - Manual (Page 8)

– 8 –
Command 6 - System Setup
Command 12 - Data Send Sequence
{ 10, Warmup Time (sec) }
{ 6, Command, Auto Power Off Time }
{ 12, Send Sequence }
Command 8 - Sampling Start
{ 8 }
Command 10 - Sensor Warmup
Command APO Time (sec)
0 or 2 Abort Sampling
( *0)
3 Turns sound off
–––
4 Turns sound on
10 APO * 0 1800
(Auto Power Off) 1 10
2 360
Command 11 - Buzzer and LED Operation Commands
{ 11, Output Select, Length, Period }
• An error occurs when fraction data is sent.
• Send commands to the EA-200 in accordance with the command table contents.
• An error occurs when a parameter that does not exist in the command table is sent.
• The EA-200 uses six digits for internal calculations.
Warmup Time (sec)
0.1 to 360 Warmup time (sec)
( *0.1)
0 Auto
–1 None
–2 Normal warmup
Output Select Length (sec) Period (sec)
* 0 Buzzer Operating Time (sec) Period (sec)
2 Ready LED
3 Sampling LED
–––
4 Error LED
5 Batt LED
Send Sequence
* 0 Non-real Time Format
1 Real Time Format