Nikon KeyMission 170 - Manual (Page 18)

6
Getting Started
Setup from a Smartphone or Tablet
• Before proceeding, install the SnapBridge 360/170 app (Aii) and
enable Bluetooth and Wi-Fi on your smartphone or tablet (below,
“smart device”).
• The camera and smart device screens shown in this manual may
differ from those of the actual products.
1
Press the movie button or photo button to turn on the camera.
• Use H, I, and k on the back side of the camera to select and adjust settings.
• A language selection dialog will be displayed. Press
H or I on the back side of the camera to
highlight a language and press
k to select.
• The language can be changed at any time using
the Language option in Camera settings in the
c (setup) menu (A23).
• If no operations are performed for about 30
minutes during setup, the camera automatically
turns off.
2
When the dialog at right is displayed,
press
H or I to select Options, and
press
k.
• Press I and scroll down to view the screen at
right.
• If you do not wish to use a smart device to
configure the camera, select Later and press
k
(
A8).
Camera Setup
Photo button
Movie button
Español
Français
Deutsch
English
set SnapBridge later
from the Network menu,
select Later.
Options
Later