Casio XW-J1 - Manual (Page 10)

Sets to “ stereo ”
(STEREO)
Lch
L R
L R
MASTER OUT
Rch
“ex. djay setting”
HEADPHONE
OUT
Split Output=OFF
(Multi out)
Lch
L R
L R
MASTER OUT
(MASTER)
(MASTER)
Rch
Lch
Rch
“ex. djay setting”
HEADPHONE
OUT
(HEADPHONE)
(HEADPHONE)
(Spin2 Rear)
(Spin2 Rear)
Sets to “ Multi ”
(Spin2 Rear)
Sets to “ split ”
(MONO)
L R
MASTER OUT
HEADPHONE
OUT
MASTER OUT
(MONO)
(MONO)
MASTER OUT
(MONO)
HEADPHONE
CUE OUT
“ex. djay setting”
Split Output=ON
SETTING UP THE XW-J1 (iOS5/6 audio setting)
*Audio output setting for application (For iOS5 users)
*Audio output setting for application (For iOS6 users)
*MONITORING (For iOS6 users)
Switching to "split" the switch to enable the Split
Output mode of App. App sends the master out
to the left channel, and the cue output to the right
channel from iOS side (as mono audio).
This lets you cue songs through your headphones
independently of the mix that's going through the
speakers. At the same time, you can hear
everything that's going on.
- iOS Left side(Master output sound) = XW-J1 Master out(mono)
- iOS Right side(Cue output sound) = XW-J1 Headphone out(mono)
Stereo output mode to enable XW-J1 to output
2ch stereo signals sent from App.
- XW-J1 Master out (L / R)
= iOS Left / Right side
(Master L / R sound)
- XW-J1 Headphone out (L / R)
= iOS Left / Right side
(Master L / R sound)
Multi output mode to enable XW-J1 to output
4channel Multi signals sent from App.
- XW-J1 Master out (L / R)
= iOS Multi out
(Master L / R sound)
- XW-J1 Headphone out (L / R)
= iOS Multi out
(Headphone L / R sound)
As iOS5 does not support 4 channel audio (master stereo and headphone stereo separately),
please use “iOS mode” switch to select “stereo” or “split” as shown below :
As iOS6 supports 4 channel audio (master stereo and headphone stereo separately),
please use “iOS mode” switch to select “Multi” as shown below :
XW-J1 is designed for DJ play and it has
DJ monitoring system for CUE.When the
cross fader is moved to the left side,song
A is output to the master, and song B is
automatically output to the headphones,
for preparing the next song.Pressing the
monitoring button on song A or B allows
for manual selection of the song heard in
the headphones.
1) Split
2) Stereo
3) Multi
CROSS FADER CROSS FADER
10