Casio SE-G1 - Manual (Page 14)

E-14
To use the cash register’s basic function
„ To set exchange rate
By setting the exchange rate, the register performs conversion
calculations between the local currency and Euro.
Step Operation
1
Enter Z then press k key to set the regis-
ter in the program mode.
Zk
2
Enter the exchange rate against Euro then
press ] key. The example on the right is for
setting DM 1.95 against 1 Euro.
Z">B]
3
Press k key to complete the program.
k
„ To set the register to accept Euro only
By the following program, the register is set to accept only Euro cur-
rency.
Step Operation
1
Turn the Mode switch to Z position.
2
Issue all the reset report by pressing p
key. See “Daily read/reset report” on page
E-28 for reset report.
p
3
Press Z?p to clear the periodical
report. See “To obtain periodic reports” on
page E-30 for periodical report.
Z?p
4
Enter ?Z?MX??X then
press k key. “010172002” is the special
program code for restricting transactions to
Euro only.
?Z?MX??X
k
5
Press p to complete the program.
p
Mode Switch
Mode Switch
SEG1_EU-e.indb 14 2012/12/07 17:18:45