Casio Naurtech CETerm Ver.5.5 User Manual - Manual (Page 97)

N AURTECH E MULATORS & W EB B ROWSER FOR W INDOWS CE / W INDOWS M OBILE
CETerm | CE3270 | CE5250 | CEVT220 Page 97
Scan Millisec: This attribute controls the scan duration. If a barcode is not read
within this time, the scanner will shut off and a failure tone is sounded. The
default value is 0 which is unlimited. Some scanners do not timeout regardless
of this setting.
Aim Millisec: This attribute controls the duration of the aimer pattern prior to
scanning of a barcode.
Verify Input: When using IBM 5250 emulation and if Verify Input is checked, the
input field at the cursor location will be checked to determine if there is sufficient
space for the scanned data. If there is no input field or there is insufficient space,
a warning will be displayed and the data will be discarded.
Symbology
Depending upon the device and built-in scanner, our Emulators and Web Browser
support about twenty different barcode symbologies. Individual symbologies may be
enabled, disabled and configured.
From the application menu, Select [Session][Configure] or tap the
"Configure" button on the toolbar.
A "Configure" dialog box will come up.
Choose the "Symbology" tab
The list box on the top left contains a list of barcode symbologies supported by the
scanner. This list of symbologies varies with every device. Configuration parameters