Envision Peripherals EN-8500 - Manual (Page 10)

EN-8500
9
BASIC CONNECTIONS
NOTE:
1. Connect the Power Adapter DC Cord to the monitor’s 12VDC Input.
2. Connect one end of the D-Sub cable to the monitor’s D-Sub Input.
3. Connect the other end of the D-Sub cable to the computer’s VGA video
output port.
4. Connect the antenna or Cable TV to the monitor’s TV input port.
5. Connect the power cord to the AC power outlet.
6. Connect the other end to the monitor’s power adapter.
Caution: If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
INSTALLATION INSTRUCTIONS (cont)