Envision Peripherals EN-8500 - Manual (Page 14)

EN-8500
13
INSTALLATION INSTRUCTIONS
• For optimal viewing it is recommended to look at the full face of the
monitor, then adjust the monitor’s angle to your own preference.
• Hold the stand so you do not topple the monitor when you change the
monitor’s tilt angle.
• You are able to adjust the monitor’s tilt angle from -5 ° to 25°.
NOTES
• Do not touch the LCD screen when you change the angle. It may cause
damage or break the LCD screen.
• Careful attention is required not to catch your fingers or hands when you
change the angle.
• The “FOLD” button on the base is for shipping or wall mount use, pls don’t
press the button when adjusting the tilt angle.
ADJUSTING THE VIEWING ANGLE