Envision Peripherals EN-8500 - Manual (Page 27)

EN-8500
26
FOR FIRST TIME INSTALLATION :
This is a Plug & Play LCD monitor. Turn off the PC then connect the
cables. Power on the PC and it will automatically detect your new
monitor. The Windows Operating system will automatically install a plug
& play driver for it. If you would still like to install the driver included in
the diskette that came with the monitor, log-on to our website at
www.envisionmonitor.com/support/faq.asp. Then look for “Installing the
Driver” section.
HOW TO INSTALL INF & ICM FILE