Envision Peripherals EN-8500 - Manual (Page 6)

EN-8500
5
S
• Set your resolution to 1024 x 768 @ 60Hz refresh rate for optimum
display quality.
• The screen surface is very soft. Do not rub, touch or tap the screen
surface with sharp object such as pen or pencil. This contact may scratch
or damage the screen. These damages are not covered under the
warranty.
• Turn your computer OFF before installing your new monitor. Refer to your
computer manual for the proper shut down procedure.
• This is a Plug & Play monitor. Microsoft Windows will automatically install
a Plug & Play driver for it when you first install this monitor. It is not
necessary to install the INF driver file included in the floppy diskette if
Microsoft Windows successfully installed a Plug & Play driver.
• Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or excessive
dust or mechanical vibration or shock.
• Save the original shipping carton and packing materials, as they will come
in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally
packed at the factory.
• To keep the monitor looking new, periodically clean the case & surface of
the TFT-LCD panel with a soft fabric lightly dampened with a glass
cleaner. Never spay the glass cleaner directly on the monitor. Never use
strong solvents such as thinner, benzene, or abrasive cleaners, since
these will damage the case & panel. As a safety precaution, always
unplug the monitor before cleaning it.
GENERAL NOTES