En-8500 – Envision Peripherals EN-8500 User Manual
Page 15
EN-8500
14
Press the Power Switch to turn the monitor ON or OFF. The other control
knobs are located at the front panel of the monitor. By changing these
settings, the picture can be adjusted to your personal preferences.
•
The power cord should be connected.
•
Connect the video cable from the monitor to the video card.
•
Press the Power Switch to turn ON the monitor. The power indicator will
light up.
USER CONTROLS
No. Name
Description
1. CH
TV or PIP Mode: Change channel down.
OSD Mode: Move down between OSD functions.
2. CH
TV or PIP Mode: Change channel up.
OSD Mode: Move up between OSD functions.
3. VOL
All Modes: Adjust volume down.
OSD Mode: Decrease value of selected OSD
function.
4. VOL
All Modes: Adjust volume up.
OSD Mode: Increase value of selected OSD
function.
5. AUTO/EXIT
PC & PIP Modes: Automatically adjust the H/V
POSITION, CLOCK & FOCUS to optimal value.
OSD Mode: EXIT from OSD menu. Or return to
previous menu when an OSD sub-menu is active.
6. REMOTE SENSOR Sensor for the remote control.
OPERATING INSTRUCTIONS