Kichler 2220 - Manual

IS-2220-CB
1)
Assemble arms (JJ) to body (Y)
using lockwashers and
hexnuts (see Fig. 2A). Tighten hexnuts using pr
ovided wr
ench.
2)
BOTTOM TIER WIRING A)
T ake 2-6”, 1-50” black and 2-6”, 1-50” white jumper wir
e
s
fr
om parts bag.
B)
Connect 6” black jumper wir
e
to 4 black socket wir
es
using pr
ovided connectors. Repeat for white wir
es.
C)
Connect 6” black jumper wir
e
to 4 black socket wir
es
using pr
ovided connectors. Repeat for white wir
es.
D)
Connect 2-6” black jumper wir
es, 50” black jumper
.
CAUTION: Make sur
e all wir
es ar
e stripped 5/8” (16 mm) and no
loose wir
e
strands ar
e outside the connectors. As an added pr
e-
caution, slightly tug on each wir
e
to ensur
e that each on is
secur
e inside wir
e
connector and then wrap the connection
with electrical tape. 3)
Slip safety cable and 50” jumper wir
e
thr
ough hole in side of
coupling FF and thr
ough hole in top of coupling.
4)
Slip safety cable and 50” jumper wir
e
thr
ough thr
eaded pipe
inside column (A).
5
)
Apply a small amount of thr
ead locking compound to thr
eaded
pipe at bottom of column (A) and scr
ew into hickey (FF). Make
sur
e all wir
es ar
e tucked into body (Y) and do not get pinched
or twisted during assembly
.
6
)
Assemble arms (AA) to body (BB) at top of column
(A) using
lockwashers and hexnuts (see Fig. 2A). Tighten hexnuts using pr
ovided wr
ench.
7)
MIDDLE TIER WIRING A)
T a
ke 4-6”, black, 4-6” white jumper wir
es and one of the
198” supply wir
es fr
om parts bag.
B)
Connect each 6” black jumper wir
e
to 4 black socket wir
e
s
using pr
ovided connectors. Repeat for white wir
es.
C)
Connect the 4 black jumper wir
es to the supply wir
e using
pr
ovided connectors. Repeat for white wir
es.
CAUTION: Make sur
e all wir
es ar
e stripped 5/8” (16 mm) and no
loose wir
e
strands ar
e outside the connectors. As an added pr
e-
caution, slightly tug on each wir
e
to ensur
e that each on is
secur
e inside wir
e
connector and then wrap the connection
with electrical tape. 8)
Slip safety cable, 50” jumper wir
e and supply wir
e
thr
ough
thr
eaded pipe inside column (E).
9)
Apply a small amount of thr
ead locking compound to thr
eaded
pipe at bottom of column (E) and scr
ew into hickey (B). Make
sur
e all wir
es ar
e tucked into body (DD) and do not get pinched
or twisted during assembly
.
10)
1
6
)
Secure bottom of middle tier arms in place using ball knobs
(GG).
11)
Assemble arms (AA) to body (BB) at top of column
(E) using
lockwashers and hexnuts (see Fig. 2A).
T
ighten hexnuts using
provided wrench.
12)
TOP TIER WIRING D)
T ake r
emaining 2 black, r
emaining 2 white jumper wir
es
and r
emaining 198” supply wir
e fr
om parts bag.
E)
Connect each 6” black jumper wir
e
to 4 black socket wir
e
s
using pr
ovided connectors. Repeat for white wir
es.
F)
Connect 2-6” black jumper wir
e, 50” black jumper wir
e,
remaining supply wir
e using pr
ovided connectors. Repeat
for white wir
es.
CAUTION: Make sur
e all wir
es ar
e stripped 5/8” (16 mm) and no
loose wir
e
strands ar
e outside the connectors. As an added pr
e-
caution, slightly tug on each wir
e
to ensur
e that each on is
secur
e inside wir
e
connector and then wrap the connection
with electrical tape. 13)
Slip safety cable and both supply wir
es thr
ough thr
eaded pipe
inside column (K).
14)
Apply a small amount of thr
ead locking compound to thr
eaded
pipe at bottom of column (K) and scr
ew into hickey (G). Make
sur
e all wir
es ar
e tucked into body (BB) and do not get pinched
or twisted during assembly
.
K
G
AA
BB
E
B
DD
A
FF
Y
JJ
CC
Date Issued: 4/10/06
1
INSTRUCTIONS
For Assembling and Installing Fixtures in Canada
Pour L
’assemblage et L
’installation Au Canada