Kichler 380003 - Manual (Page 3)

2
Goiden Irescence
TM
4. INSTALLING THE LIGHT BULBS &
GLASS SHADES
Fig. 4
Fig. 3
1. Remove the large nut from each light
socket. Place a glass shade over the socket
and replace the large nut and tighten with the
tool provided. Make sure that the glass
shade is straight. Repeat this process for
each of the light fixture arms. (Fig. 4)
2. Install 3,60 Watt (maximum) candelabra
base light bulbs (not included) (Fig. 4)
3. Restore power only after the installation is
complete.
3. Carefully push all of the wires into the
Switch Housing. Align the keyholes on
the light fixture with the screws on the
mounting plate. Turn the light fixture
counterclockwise and tighten all three
screws . ( Fig 3)
Socket ring tooling
Light fixture
Light fixture
Bulb
Glass shade