Crivit KH260-10/09-V2 - Manual (Page 12)

- 10 -
Commissioning
Before the fi rst usage, remove the transparent isolation
strip from the battery compartment (see also Changing
the batteries).
Programming your pace length
Fig.: Fat burning/Number of paces
This programming is only necessary on fi rst taking the
device into use and after a battery exchange.
Repeatedly press the button MODE until you are in the •
display mode Fat burning/Number of paces.
Press the button UP to switch to the display mode Fat
•
burning/Number of paces.
Press the button SET for three seconds, the standard
•
pace value (60 cm) blinks.
Press the button UP to adjust the pace length
•
(Adjustment range 30 – 180 cm).
Press the button SET to accept the settings and to
•
depart the adjustment mode.
KH260_43209_LB3A.indb Abs1:10 KH260_43209_LB3A.indb Abs1:10 26.11.2009 15:13:23 Uhr 26.11.2009 15:13:23 Uhr