Crivit KH260-10/09-V2 - Manual (Page 20)

- 18 -
Press the button • to switch the radio on. The Indicator
LED glows.
Press the button SEEK + to start the station search.
•
The device now searches the frequency range upwards
until a station with a strong enough transmission signal
is found.
Press the button SEEK + once again to search for a
•
station at the next higher frequency.
Press the button SEEK - to search the frequency range
•
downwards until a station with a strong enough trans-
mission signal is found.
Adjust the desired sound volume level with the buttons
•
VOL+/VOL-.
Press the button
• once again to switch the radio off .
The Indicator LED extinguishes.
KH260_43209_LB3A.indb Abs1:18 KH260_43209_LB3A.indb Abs1:18 26.11.2009 15:13:24 Uhr 26.11.2009 15:13:24 Uhr