Epson TOUCH DH200 - Manual (Page 15)

5
REAR PANEL
1. CAMERA IN: Camera input ports for BNC cameras.
2. VIDEO OUT: Video output (BNC) to connect the system to a secondary monitor or DVR.
3. AUDIO IN: One 3.5" RCA port (mono) for recording audio from an audio capable camera (not included).
4. VGA: VGA port to connect the system to a VGA monitor.
5. LAN: Connect an Ethernet cable to connect the system to a router or switch (not included).
6. MOUSE: USB port to connect a USB or PS/2 mouse (PS/2 mouse requires USB adapter).
NOTE: Do not connect a USB flash drive to the "Mouse" port. The USB port on the front panel has been
specifically designed for high-speed data transfer to a USB flash drive.
7. ALARM IN: Alarm block to connect external alarm or motion devices (not included).
8. SPOT OUT: Video output to connect the system to an external monitor (not included). Spot Out mode
only displays channels switching in an automatic sequence.
9. AUDIO OUT: One 3.5" RCA port (mono) for audio output.
10. RS422 / 485 / OUT: Connection block for an RS422/485 PTZ camera (not included).
NOTE: The RS232 ports are for development purposes only. A PTZ camera cannot be controlled from
these ports.
11. DC 12V: Port for 12V DC 3A power supply (included).
12. Exhaust fan: Do not block. Keep clear to allow for proper ventilation.
4 5 6 7 1 2 3
8 9 10 11 12