Figure 41.3 ddns menu, Open the main menu and click network, Select the ddns tab – Epson TOUCH DH200 User Manual
Page 84: Under use, select digimerge, Under user id, enter your digimerge ddns user name, Under password, enter your digimerge ddns password, How do i enable ddns on my system
74
Appendix C: Setting Up DDNS Service
How Do I Enable DDNS On My System?
Once you have registered for free DDNS service, use the information in the confirmation email to
configure DDNS settings on your system.
To enable DDNS on your system:
1. Open the MAIN MENU and click NETWORK.
2. Select the DDNS tab.
3. Under USE, select DIGIMERGE.
4. Under DOMAIN NAME, enter only the first portion of your DDNS domain from the
confirmation email. For example, if your domain name is [email protected], you
only need to enter
tomsmith
in the text field.
5. Under USER ID, enter your Digimerge DDNS user name.
6. Under PASSWORD, enter your Digimerge DDNS password.
NOTE:
Obtain your Digimerge DDNS user name and password from the confirmation email.
7. Under DDNS TEST, select START. You should receive a "SUCCESS" message. If there is an
error, check your network connections; check that you have entered the correct domain
name, user ID, and password.
8. Press ENTER to save your settings. Press CANCEL/ESC to close remaining windows.
With DDNS entered on your system, you can access your DVR from a remote location by using DVR
NetView remote software or by entering the Digimerge DDNS domain name in your browser.
Figure 41.3 DDNS menu