Electrolux OHV - Manual (Page 27)

26 27
7.10 Handles and Console Panel – Exploded Parts View
7.11 Remove Console Panel to service controls and handles
7.12 Auger Engagement Interlock
7.13 Replace Headlight –
7.14 Control Panel, Discharge Chute, Controls – Exploded Parts View
7.16 Replace Chute Control Cable
7.17 Replace Chute Deflector Control
7.18 Replace Speed Control Linkage or Speed Control Assembly
7.19 Remove and Replace Power Steering Control Cable
7.21 Power Steering and Wheel - Exploded Parts View
7.22 Repair Power Steering Clutch
7.23 If Power Steering Slips -
7.24 Power Steering uses Klik Pin in one position only
7.25 Standard Drive uses Klik Pin in Drive and Push positions
7.31 Idlers, Belts, Pulleys
7.32 Replace Auger Belt
7.33 Belt Guide Dimensions
7.34 Replace Traction Drive Belts
7.35 Replace Traction Drive Pulley
7.36 Idler Spring Locations
7.37 Remove And Replace Engine
7.41 Exploded view of Friction Disc, Friction Plate, and Gears
7.42 Procedure to Remove Bottom Pan
7.43 Replace Friction Disc or Friction Disc Shaft
7.44 Replace Rubber Wheel Ring or Hex Shaft
7.45 Replace Drive Plate Assembly Lubrication INSTRUCTION )
7.46 Disassemble Drive Plate / Drive Pulley Assembly
7.47 Remove and Replace Wheel Drive Axle / Gear
7.51 Remove Chute Assembly for servicing other items
7.61 Remove Auger Assembly for servicing
7.62 AUGER Exploded Parts View
7.63 Replace Auger Shear Bolts
7.64 Replace Impeller Shear Bolts
7.65 Disassembly of Auger Pulley, Auger, Impeller, and Auger Housing
7.66 Re assembly of Auger Assembly
7.67 Replace Scraper Bar – reversible
7.68 Gearbox Repair Information
SECTION 7: Systems and Repair Procedures
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com