Florabest FHL 900 A1 - Manual (Page 50)

50
GB MT
Furthermore, a condition of the guarantee
services is that the maintenance intervals
indicated in the operating instructions
have been observed and the instructions
for cleaning, care and maintenance have
been followed. Damages due to material
or manufacturer faults will be repaired free
of charge by replacement delivery or re-
pair. However, this is conditional upon the
unit being returned complete and assem-
bled to our Service Centre, together with
proof of purchase and guarantee slip.
Repairs that are not covered by the guar-
antee can be carried out by our Service
Centre for a fee. Our Service Centre will
be happy to provide you with a cost esti-
mate. We can deal only with equipment
that has been packaged correctly and
which has been sent to us with the correct
postage paid.
If you have a justified guarantee claim,
please contact our Service Centre by
telephone, from which you will then be ad-
vised on how the claim will be processed.
Caution: The sender shall bear the cost
of any material damages during transport.
In case of complaint or for servicing,
please send your equipment cleaned and
with an indication of the defect, to our
service address.
Equipment sent in with freight collect
– by bulk freight, express or with other
special freight – are not accepted.
We can dispose of your equipment free of
charge.
Waste Disposal
and Environmental
Protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Electrical machines do not belong
in domestic waste.
Take the equipment to a waste disposal
site. The plastic and metal parts that are
used can be separated out into pure grade,
which allows recycling. Ask our Service
Centre for details (see p.69 for address).
Technical Data
Electrical Hedge Trimmer....FHL 900 A1
Input voltage rating ......230-240V~, 50 Hz
Input power .....................................900 W
Safety class ....................................... II
Degree of protection .........................IP 20
Weight .......................................... 6,22 kg
Cutting length ..............................410 mm
Cutting capacity .............................20 mm
Acoustic pressure level (LpA)
................... 89,2 dB(A); KpA = 1,11 dB(A)
Measured sound power level (LwA)
................. 95,63 dB(A); KwA = 1,11 dB(A)
Guaranteed sound power level
..................................................97,0 dB(A)
Vibration at the handle
........................... 7,096 m/s 2 ; K = 1,5 m/s 2
Vibration at the round handle
........................... 5,862 m/s 2 ; K = 1,5 m/s 2