Ultimate Speed UOP 12 A1 - Manual (Page 5)

2 UOP 12 A1
GB
Introduction
Information for these operating instructions
Congratulations on the purchase of your new device.
You have clearly decided in favour of a quality product. These operating instructions
are a component of the Oil Suction Pump UOP 12 A1 (henceforth designated
as the device, pump or product). They contain important information in regard to
safety, use and disposal. Before using the product, familiarise yourself with all of
these operating and safety instructions. Use the product only as described and
only for the specifi ed areas of application. In addition, pass these documents on,
together with the product, to any future owner.
Copyright
This documentation is copyright protected. Any copying or reproduction of it,
including as extracts, as well as the reproduction of images, also in an altered
state, is only permitted with the written authorisation of the manufacturer.
Limited liability
The manufacturer assumes no responsibility for damage caused by failure to observe
these operating instructions, improper use, incompetent repairs, making unauthor-
ised modifi cations or for using unapproved replacement parts.
Intended use
This device is intended exclusively for noncommercial use in the pumping of
engine oil, diesel or fuel oil.
This product is not suitable for pumping water (no lubrication of the pump), gear-
box oil (too thin-bodied) or highly fl ammable liquids (petrol and paraffi n etc.).
This device is not intended for any other use or for uses beyond those mentioned.
Claims of any kind for damage resulting from unintended use will not be accepted.
The operator alone bears liability.
IB_102790_UOP12A1_LB4.indb 2 IB_102790_UOP12A1_LB4.indb 2 25.08.14 11:27 25.08.14 11:27