Sealey TA4000 - Manual (Page 26)

26
19. Window indicates the display waveform in buffer position.
20. Marker shows horizontal trigger position.
21. Trigger status indicates the following:
AUTO: The oscilloscope is in auto mode and is acquiring waveforms in the absence
of triggers.
Trig’D: The oscilloscope has seen a trigger and is acquiring the post trigger data.
WAIT: All pretrigger data has been acquired and the oscilloscope is ready to accept
a trigger.
STOP: The oscilloscope has stopped acquiring waveform data.
RUN: The oscilloscope is running.
PLAY: The oscilloscope is displaying the recorded waveforms.
The Menu System
The Main Menu
1. File: Load or Save data, setup
Original Language Version TA4000 Issue: 1 - 06/09/11