Set vertical system – Sealey TA4000 User Manual
Page 38
Advertising

38
Set Vertical System
Set Channel
Click “
Vertical” in “Setup” Menu.
Select a channel.
See t
he Channel Control Panel in sidebar.
The Vertical function:
ON/Off: Turns the channel on or off.
Volt/DIV: Select the channel voltage/div
Coupling: Select the channel coupling
Probe: Select the channel probe attenuation
Filter: Select software filter
Reset: Set the channel vertical position to zero
Invert: Turn on/off the invert function.
BandWidth Limit: Limit the channel bandwidth to 20MHz to reduce noise.
Change Volt/DIV
You can select “Volt/Div” in “Vertical Setup” window to select the voltage
Original Language Version
TA4000 Issue: 1 - 06/09/11
Advertising