Sealey TA4000 - Manual (Page 45)

45
Click “ REF” in “Setup” menu to set REF channel.
The Reference Channel Function:
On/Off: Turns the reference channel on or off .
Volt/DIV: Adjust the resolution of the reference channel.
Load: Load the reference waveform from an “.rfc” file on your computer.
Save: Save the current reference waveform to your computer as “.rfc” format.
Save Reference: Save the current reference waveform to your computer as “.rfc” for-
mat.
You can change the vertical scale of a waveform. The waveform display will contract or
expand relative to the reference level.
Load
Click “ Load” to load the *.rfc file that was selected. The load file window will appear.
Save
Click “ Save ” to save the waveform to *.rfc file. The saved source window appears.
Set Reference
Original Language Version TA4000 Issue: 1 - 06/09/11