Livarno COLOUR-CHANGE CEILING LIGHT - Manual (Page 30)

30 GB
Safety Introduction
Colour-change ceiling light
Introduction
Congratulations on your new product.
You have selected a high quality product.
The instructions for use are a part of the
product. They contain important information about
safety, use and disposal. Before using the product,
please familiarise yourself with all the operating and
safety instructions. Only use the product as described
and for the indicated purpose. When passing this
product on to others, please be sure to include all
its documentation. Before using this product for the
first time verify the correct voltage and that all parts
are properly installed.
Intended use
This light is only suitable for indoor use in dry and
enclosed spaces. The light can be fastened to any
normally inflammable surface. This product is only
intended for private household use (LED colour
change – not room lighting).
Scope of delivery
Check immediately after unpacking that the parts
are complete and that the product is in proper
condition.
1 Colour changing ceiling light, model 3571-096L
9 Halogen light bulb, G4, 14 W
1 Remote control unit
1 Battery, 23 A, 12 V
4 Screws (ceiling bracket)
4 Rawlplugs
1 Tool
2 Screws (wall bracket)
2 Rawlplugs (wall bracket)
1 Wall bracket (remote control)
9 Lamp shades
1 Set of instructions for use
Parts description
1 Mounting bracket
2 Connection housing
3 Rawlplug
4 Screws (connection housing)
5 Screws (mounting bracket)
6 Lamp shades
7 Plastic ring
8 Nut
9 Tool
10 Light bulb
11 Bulb socket
12 Plastic housing
13 Protective tube
14 Mains connection cable (external)
15 Terminal block
16 Remote control unit
17 Screws (wall bracket)
18 Wall bracket (remote control)
19 Rawlplug (wall bracket)
Technical Data
Ceiling light:
Operating voltage:
230–240 V∼, 50 Hz
Halogen light bulb: 12 V∼, 14 W, G4
LED light bulb: LED 54 x 0.06 W,
coloured
Rated power
maximal:
9 x max. 14 W
Protection class: II /
Protection class: IP 20
Remote control receiver:
Rated voltage:
220–240 V∼, 50 / 60 Hz
Max. load capacity: 250 W
Frequency: 433.92 MHz
Remote control transmitter:
Operating voltage:
12 V , 5 mA
Frequency: 433.92 MHz