Epson 200 - Manual (Page 21)

Table 1-13. Built-in Functions on the Panel
Button Function
1’st switch
Switch pushed with power on and
release 2’nd switch
Switch pushed within 3
seconds after power on
^
Cleaning ——— Self test
Load/Eject + Cleaning ——— Default Setting
Cleaning Load /Eject Data dump
Load/Eject ——— Demonstration
Load/Eject + Cleaning Load/Eject
Default Setting
(without the sheets)
Load/Eject + Cleaning
Load/Eject
*Hold down both buttons over
10 seconds until Ink Out and
Paper Out light blink
Clear EEPROM
Load/Eject Cleaning Non-smear printing
Load/Eject + Cleaning
Load/Eject + Cleaning
*Hold down both buttons over
10 seconds until Ink Out and
Paper Out light blink
Clear user-setting on
EEPROM
Other combinations Other combinations Not available
Table 1-14. Button Operations in Default Setting Mode
Button Function
Load/Eject Move through each menu
Cleaning Select
Table 1-15. Error Indications
Printer Status Indicators +
^ Power Inkout Paperout
Ink low (printable) On Blinks —-
Ink out (unprintable) On On —-
Paper out On —- On
Paper Jam On —- Blinks
Replacing head/ink or
During ink sequence
Blinks —- —-
No cartridge On On ——
No head
On Blink
(rapidly)
——
Carriage control error or
Fatal Error
Blinks On On
Maintenance request Blinks Blinks Blinks
Epson Stylus Color 200 /Epson Stylus 200 Product Description
Rev. A 1-13