Epson 200 - Manual (Page 35)

3.2.1 Upper Case Removal
1. 1. Remove the sheet guide from main unit. Then remove 2 CBB (M4
×
11) screws securing the upper case
to the bottom case.
2. Open the front cover; then remove 2 CBB (M4
×
11) screws securing the upper case to the bottom case.
3. Remove 1 small screw securing the ASF knob to the lever.
4. Remove the upper case by lifting the front side.
DISASSEMBLY/ASSEMBLY POINT
When you move the carriage unit manually to remove 1 screw(*), push it once toward the right,
and move to the left side .
CBB(M4X11)
CBB(M4X11)
CBB(M4X11)
CBB(M4X11)
CBB(M4X11)
Small Screw
(*)
Figure 3-1. Upper Case Removal
START
3.2.1 Pag e 3-2
Upper Case
Removal
3.2.2 Pag e 3-3
C199 Main Board
Removal
3.2.3 Pag e 3-4
C1 60 I/F Boa rd
Re m o v a l
3.2.4 Page 3-5
C1 60 PS Board
Re m o v al
3.2.5 Page 3-6
M-4 C1 1 M echa n ism
Rem o va l
3.2.6.1 Pag e 3-7
Carriage Unit
Removal
3.2.6.2 Page 3-9
ASF Unit
Re m o va l
3.2.6.3 Pag e 3-9
PE Sensor
Removal
3.2.6.4 Pag e 3-1 0
Pickup Roller
Re m ova l
3.2.6.5 Page 3-10
CRHP Sensor
Removal
3.2.6.6 Pag e 3-1 1
Paper Feed Roller
Unit Removal
3.2.6.8 Pag e 3-1 2
Head Cleaner
Replacement
3.2.6.9 Pag e 3-1 3
Pu mp Unit
Re m o va l
3.2.6.10 Page 3-14
Pape r Feed Motor
Re m o v a l
Disassembly and Assembly EPSON Stylus Color 200 / EPSON Stylus 200
3-2 Rev. A