Radio reset (reset), Gb display – Silvercrest SAR 28 A1 User Manual
Page 130
126
SAR 28 A1
GB
Display
♦
Press and hold the BD/DISP
7
button until the time (CT) is shown on the
display
5
. Now keep pressing the BD/DISP button to have the following
information displayed in turn:
Radio station, time (automatically set with RDS reception), frequency and PTY set-
tings (these RDS functions are sent by broadcasting services in various volumes;
also refer to Section “Radio functions”).
NOTE
►
If you are not receiving any RDS or PTY information, PTY NONE is shown on
the display.
►
The radio switches back to standard operation after around 5 seconds
without user input.
Radio reset (RESET)
To reset the device to its default factory settings, keep the RESET
22
button
pressed for about 6 seconds with a sharp object, such as a pen.
NOTE
►
To access the RESET button, the face plate must be completely removed,
see also Section "Removing the face plate".
Reset the device:
▯
when using for the fi rst time,
▯
after connecting the cables,
▯
when not all function buttons are working,
▯
when an error message is shown on the display,
▯
if there is an obvious malfunction in the device.
IB_42775_SAR28A1_LB1.indb 126
IB_42775_SAR28A1_LB1.indb 126
22.10.13 16:07
22.10.13 16:07