Cleaning, Disposal, Connecting an external audio device to the device – Silvercrest SAR 28 A1 User Manual

Page 138: Safety instructions, Cleaning the display, Disposal of the device

Advertising
background image

134

SAR 28 A1

GB

Search for directories

Press the A/PS

16

button three times. The directory currently being

played back is shown.

Turn the multi-controller

17

to switch between the available directories.

Press the 1/PAU

14

button to select the directory currently being displayed.

Playback of the fi rst title from the selected directory starts immediately.

Connecting an external audio device to the device

Connect the audio output of an external audio device (e.g. an MP3 player)
via a 3.5 mm stereo jack plug to the AUX

8

socket on the front panel of

the device.

Select audio input playback by repeatedly pressing the MD/PTY

3

button until AUX is shown on the display.

Cleaning

Safety instructions

CAUTION

Possible damage to the device

To avoid irreparable damage, ensure that no moisture penetrates into the
device whilst it is being cleaned.

Cleaning the display

Only clean the front panel of the device / the display with a soft, moist,
lint-free cloth and mild dish washing liquid.

Disposal

Disposal of the device

Never dispose of the device in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU-WEEE (Waste Electrical and Electronic Equipment).

Dispose of the device through an approved disposal centre or at your community
waste facility. Please observe currently applicable regulations. Please contact
your waste disposal centre should you be in any doubt.

IB_42775_SAR28A1_LB1.indb 134

IB_42775_SAR28A1_LB1.indb 134

22.10.13 16:07

22.10.13 16:07

Advertising