Samsung Gear S3 SM-R760 - Manual (Page 83)

Applications
83
Mobile networks
Customise settings to control networks.
On the Settings screen, tap
Connections → Mobile networks.
• Mobile networks:
– Auto on/off: Set the Gear to automatically connect to or disconnect from the mobile
network depending on the Gear’s connection to the mobile device via Bluetooth.
• When the Gear is connected to the mobile device via Bluetooth, the Gear’s mobile
network is turned off to save battery power. Then, the Gear will not receive
messages and calls made to the Gear’s phone number.
• The Gear’s mobile network is automatically turned on after a moment when no
Bluetooth connection is detected. Then, you can receive messages and calls made
to the Gear’s phone number.
– Always on: Set the Gear to connect to the mobile network.
When this option enabled, you can receive incoming calls and messages to the Gear
and mobile devices’ phone numbers.
When you enable the Always on option, the Gear’s battery consumption may
increase.
– Always off: Set the Gear not to connect to the mobile network.
When this option is enabled, you cannot receive incoming calls and messages to the
Gear’s phone number. If the Gear is connected to the mobile device via Bluetooth, you
can receive incoming calls or notifications from the mobile device.
• Mobile data: Set the Gear to use data connections on any mobile network.
• Data roaming: Set the Gear to use data connections when you are roaming.
• Network mode: Select a network type.
• Network operators: Search for available networks and manually register a network.
• Access Point Names: Set up access point names (APNs).