Epson DFX-9000 - Manual (Page 104)

104 Control Panel
Note:
The instructions and current settings are printed out in the
language that you set in the SelecType mode. If you want to change
the language, change the language setting in the SelecType mode.
See “Changing the settings in the SelecType mode” on page 101 for
details.
3. Select one of the three main menus by pressing the SetU (Tear
Off) or SetD (Top of Form) button.
Note:
You can scroll value by holding the SetU (Tear Off) or SetD (Top
of Form) button for a few seconds.
4. If you select Print Settings, press the ItemD (Pitch) button
to print the current settings.
If you select Form w/labels or Panal lock out, press the
ItemU (Font) or ItemD (Pitch) button to select the setting
items which you wish to change and go to the next step.
Note:
You can scroll the menu by holding the ItemU (Font) or ItemD
(Pitch) button for a few seconds.
5. Press the SetU (Tear Off) or SetD (Top of Form) button to
select the values within the selected parameter until you find
the desired setting.
Note:
You can scroll value by holding the SetU (Tear Off) or SetD (Top
of Form) button for a few seconds.
6. After setting the selected parameter to the desired setting, you
may either continue to make changes to other parameters by
pressing the ItemD button or the ItemU button, or exit the
default-setting mode.