Epson DFX-9000 - Manual (Page 99)

Control Panel 99
4
4
4
4
4
4
4
4
4
4
4
4
IP address
This setting is available only when the optional Print Server is
installed and the Get IP address setting is set to Panel or Ping.
You can set the printer’s IP address with this setting.
Subnet mask
This setting is available only when the optional Print Server is
installed. You can set the printer’s subnet mask with this setting.
Default gateway
This setting is available only when the optional Print Server is
installed. You can set the printer’s default gateway with this
setting.
Save settings?
This menu appears by pressing the Menu (Tear Off and Top of
Form) buttons in the SelecType mode. When you select Yes, the
current settings in the SelecType mode are saved.
default-setting mode
You can make settings for continuous forms with labels and the
panel lock out mode in the default setting mode. These settings
are shown in the following tables.
Continuous forms with labels
The following settings are available only when the Continuous
forms with label
setting is set to On in the SelecType mode.
Menu Values (default in bold)
Label base position Paper left edge, First dot
Label top position 0 to 4752/216 (by 1/216 inches)
Label length 0 to 4752/216 (by 1/216 inches)