MEDC Weatherproof ResistTel IP - Manual (Page 35)

Short Manual ResistTel IP2 / IP152 Page 35
ExResistTel IP2 / IP154
2.3.10
Transferring a Call directly
You are making a call and want to switch it to another connection.
Torsten 72
Peter 36
Transfer
1
Figure 22: Transferring a Call Directly
1. Press the key (long) during a call.
2. You will be left. The actual connection will not be displayed.
3. Dial the call number of your choice.
4. Press the key (short) or key .
5. The caller will be connected with the dialled port directly.
6. With handset mode hang up.
2.3.11
Initiating a Conference
You can use this function to set up a conference between two lines. To do so, you
need an active line and a line on hold (refer to chapter 2.3.7 "Making second Call"
beginning on page 32).
Torsten 72
anonym
Torsten 72
Peter 36
3party
06.01.10 14:40 0:22
Figure 23: Conference
1. Press the key or the key (short) followed by the key during a call with an
active line and a line on hold.
A conference is set up between the active line and the line on hold. All the
subscribers can now talk with each other (see Figure 23).