MEDC Weatherproof ResistTel IP - Manual (Page 36)

Page 36 Short Manual ResistTel IP2 / IP152
ExResistTel IP2 / IP154
2. You can end the conference by pressing the key respective the key (short)
followed by the key or twice the key (short). If you end the conference with
pressing the key or the key (short) followed by the key , the call put on
hold prior to the initiated conference is now on hold again and the previously
active call is active once again. If you end the conference with pressing the key
(short) twice, the call put on hold prior to the initiated conference is now
active and the previously active call is now on hold.
3. To terminate the active line, you must press the key . The connection to the
active conversation partner is terminated. Please note also the tip in chapter
2.3.7.


Note
If you
• hang up (handset mode)
• press the loudspeaker key (hands free mode)
• press the headset key (Key
long (longer than a second) and then the
loudspeaker key ) (headset mode)
during the conference, the lines of both parties keep connected.
