Precision Digital PD662 - Manual (Page 17)

PD662 Loop-Powered Meter Instruction Manual
17
Main Menu Display Functions & Messages
The meter displays various functions and messages during setup,
programming, and operation. The following table shows the main menu
functions and messages in the order they appear in the menu.
Display Parameter Action/Setting
dp Decimal point Set decimal point
SCL Scale Enter the Scale menu
Npt Number of Points Set number of linearization points
in1 Scale Input 1 Input signal 1 value (mA)
D1 Scale Display 1 Scaled value for input 1
in2 Scale Input 2 Input signal 2 value (mA)
D2 Scale Display 2 Scaled value for input 2
CAL Calibrate Enter the Calibrate menu
Npt Number of Points Set number of linearization points
in1 Calibrate Input 1 Read input signal 1
D1 Calibrate Display 1 Enter value for input 1
in2 Calibrate Input 2 Read input signal 2
D2 Calibrate Display 2 Enter value for input 2
Setting the Decimal Point (dP)
Decimal point may be set with up to three decimal places or with no
decimal point at all.
Pressing the Right or Up arrow moves the decimal point one place to
the right until no decimal point is displayed, then it moves to the left
most position.
ENTER
dP dd.dd
or
Select Decimal Point
Next