Epson 500 - Manual (Page 35)

Saving and Resetting Menu Selections
35
Resetting the Projector
If the image quality isn’t what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Setting menu), open that
menu, select
Reset , and confirm as needed. The example below shows how to reset the
Image menu:
You can also reset the lamp usage timer, clear the memory settings, or restore all the projector
settings to their original values. Follow these steps:
1. Press the Menu button on the remote control.
2. Open the Reset menu.
3. Do one of the following:
■ Select Lamp-Hours Reset to clear the lamp usage timer and reset it to zero
(see page 58 for more information).
■ Select Memory Reset to clear any memory settings you created as described on
page 34.
■ Select All Reset to return all projector menus to their original settings.
Note: All Reset does not reset the lamp usage timer, menu language, Input Signal, and
memory settings.
Open the Image
menu . . .
. . . and select
Reset