Epson 500 - Manual (Page 37)

Customizing Projector Features
37
Screen Options
■ Message
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
■ User’s Logo
Lets you display an image of your choice when the projector is warming up, not receiving
a signal, or when you press the
Blank button to temporarily stop projection.
To capture the image, first set the projector to display the image you want to use. Then
select
User’s Logo and follow the instructions on the screen. When done, change the
Background Color setting to Logo , as described below.
■ Startup Screen
Turn this setting off if you want to prevent your user’s logo (see above) from appearing
while the projector is warming up.
■ Background Color
Changes the screen that’s used when the projector is not receiving a signal or when you
press the
Blank button to temporarily stop projection. Select Blue (instead of Black ) or
Logo to display your user’s logo on a black background.
Setting ! On-Screen Display ! Message
Setting ! User’s Logo
Setting ! On-Screen Display ! Startup Screen
Setting ! On-Screen Display ! Background Color